G
B
TM
H
Features
A. “Cool-Touch” cabinet E. MODE button
B. POWER button F. LED temperature display
C. Decrease temperature button G. Standby ON/OFF button
D. Increase temperature button H. Visual alarm LED
I.
Power LED
Special Features
LED Display – When the unit is plugged in, the LED display will show the
room temperature. At Auto mode, it will display the set value 2 minutes
after the desired temperature is set.
Overheat Shut-Off Protection System –This heater includes a protection
system that shuts off the unit if it overheats for any reason.
Inlet Air Overheat Protection System – This heater will automatically shut
off if the inlet air duct becomes obstructed and causes the unit to overheat.
Safety Tip-Over Switch – The Dr. Infrared Heater is designed to shut off
automatically when tipped in any direction. The alarm will beep and the
LED display will flash. Place the heater on a flat, smooth, stable surface to
prevent the heater from tipping over again. When returned to a normal
upright position, the heater is ready for use again. This is a safety feature
to avoid the possibility of fire should the unit be tipped accidentally.
Note: There may be a trace of smoke or odor when the unit is first operated.
Do not be alarmed. This indicates a drop of oil fell on the interior coils during
the manufacturing process. It will quickly evaporate and should not recur.
To Next Page
Loading...
