Dräger FPS 7000 Technical Manual

Contents | en
Technical manual | FPS 7000FPS 7000 RP 11
FPS 7000FPS 7000 RP
Contents
1 Safety-related information................................ 12
2 Conventions in this document......................... 12
2.1 About this document ............................................ 12
2.2 Meaning of the warning notices ........................... 12
2.3 Trademarks.......................................................... 12
3 Maintenance work ............................................. 12
3.1 General notes ...................................................... 12
3.2 Inspection and maintenance intervals.................. 12
3.3 Cleaning and disinfecting..................................... 13
3.3.1 Cleaning and disinfecting the full face mask or
mask/helmet combination .................................... 13
3.3.2 Cleaning and disinfecting the drinking valve........ 13
3.4 Leak test .............................................................. 13
3.4.1 Checking for leaks ............................................... 13
3.4.2 Test with sealed exhalation valve (FPS 7000
RA/PE/ESA/P) ..................................................... 14
3.4.3 Leak test under water .......................................... 14
3.4.4 Checking the opening pressure of the sealed
exhalation valve (FPS 7000 RA/PE/ESA/P) ........ 14
3.4.5 After testing.......................................................... 14
3.5 Replacing the speech diaphragm ........................ 14
3.6 Replacing the exhalation valve ............................ 14
3.6.1 Mask with RA-type connector .............................. 14
3.6.2 Mask with P, PE or ESA-type connector.............. 14
3.7 Replacing the inhalation valve ............................. 14
3.7.1 Mask with P-type connector................................. 14
3.7.2 Mask with PE or RA-type connector .................... 14
3.7.3 Mask with ESA-type connector ............................ 14
3.8 Replacing the front port........................................ 15
3.8.1 Replacing the front port
(FPS 7000 RA/PE/ESA/P) ................................... 15
3.8.2 Replacing the front port (FPS 7000 RP) .............. 15
3.9 Replacing the visor .............................................. 15
3.9.1 Replacing the visor (FPS 7000 RA/PE/ESA/P).... 15
3.9.2 Replacing the visor (FPS 7000 RP) ..................... 15
3.10 Rep
lacing the inner mask .................................... 16
3.11 Replacing the inner mask control valve discs
(FPS 7000 RA/PE/ESA/P) ................................... 16
3.12 Replacing the head harness ................................ 16
3.13 Replacing the wiper (FPS 7000 RP) .................... 16
3.14 Replacing the drinking valve (FPS 7000 RP)....... 17
4 Storage............................................................... 17
5 Disposal ............................................................. 17

Dräger FPS 7000 Specifications

General

Visor Material	Polycarbonate
Facepiece Material	Silicone or EPDM
Approval	EN 136 class 3
Type	Full-face mask
Standards	EN 136 Class 3