User Manual for LoRaWAN End Nodes - RS485-LN – RS485 to LoRaWAN Converter User Manual
Once there is power, the RS485-LN will be on.
3.Operation Mode
3.1 How it works?
The RS485-LN is configured as LoRaWAN OTAA Class C mode by default. It has OTAA keys to join network. To
connect a local LoRaWAN network, user just need to input the OTAA keys in the network server and power on the
RS485-LN. It will auto join the network via OTAA.
3.2 Example to join LoRaWAN network
Here shows an example for how to join the TTN V3 Network. Below is the network structure, we use LG308 as
LoRaWAN gateway here.
Page 7 / 38 - last modified by Bei Jinggeng on 2022/07/08 16:50
To Next Page
Loading...
Need help?
General