Dragino RS485-LN - Page 9

User Manual for LoRaWAN End Nodes - RS485-LN – RS485 to LoRaWAN Converter User Manual
The LG308 is already set to connect to TTN V3 network. So what we need to now is only configure the TTN V3:
Step 1: Create a device in TTN V3 with the OTAA keys from RS485-LN.
Each RS485-LN is shipped with a sticker with unique device EUI:
Page 9 / 38 - last modified by Bei Jinggeng on 2022/07/08 16:50