(2) Upload new photos or videos. To do this, tap the Camera icon to take new photos or
videos, and select the desired frame to send them to. After you have done so, tap the
arrow icon in the upper right corner to confirm. The photo frame will receive the photos
or videos in seconds. You can check them on the frame's photo or video library.
Note:
➀ If the frame didn’t receive the photos or videos, please reboot the product or check the
Wifi network.
3. Upload Photos and Videos Via USB Drive/ TF Card
You can also add photos and videos via external drives, such as USB drives and TF cards. To
do this, follow the simple steps below.
(1) Insert a USB drive or a TF card into the frame, then wait for a few seconds. You will be
notified that your frame is successfully connected to the external drive.
(2) Enter the Photo or Video library, and tap on the "USB" or "TF Card" option, you will see
all the photos or videos stored in the USB drive or the TF card.
(3) Tap the More icon in the upper right corner, and select the photos or videos you would
like to copy to the frame's external storage.
(4) Tap the Copy icon on the top, then tap on the OK option to import the photos or videos.
(5) Your photos or videos will be reserved in the frame's external storage in seconds. You
can check them in the "USB" or "TF Card" setting, or on the frame's photo or video library.
Tips:
➀ Max support a 64GB TF Card.
➁ Please remove all your external devices when you reset the photo frame.
➂ If you have too many files stored in the card, it will take more time to read.
➃ Not all models support external drives. Please prevail in kind.
➄ USB drive or TF Card supports the FAT32 format only.
photo or video library.
Tip: The time it takes for your frame to receive your photos or videos depends on the size
of your file; each video clip is limited to 200MB.
14
To Next Page
Loading...
