5. Upload Music Via USB Drive/ TF Card
The frame also lets you upload music via external drives, such as USB drive and TF cards.
To do this, follow the simple steps below.
(1) Insert a USB drive or a TF card into the frame, then wait for a few seconds. You will be
notified that your frame is successfully connected to the external drive.
(2) Enter the Photo or Video library, and tap on the "USB" or "TF Card" option, you will see
all the music stored in the USB drive or the TF card.
(3) Tap the More icon in the upper right corner, and select the music you would like to copy
to the internal memory of the frame.
(4) Tap the Copy icon on the top, then tap on the OK option to import the music.
(5) Your music will be reserved in the external storage in seconds. You can check them in
the "USB" or "TF Card" setting, or on the frame's music library.
6. Upload Music Via Computer
In addition, you can upload your music via a computer. To do this, follow the simple steps below.
(1) Connect your computer to the frame with a Type-C cable. Be sure to keep the frame
turned on.
(2) Find your frame disk named after the frame’s model number in your computer.
(3) Add music that you would like to play on your frame to the exact sub-folder in your
frame disk.
(4) The music you upload from your computer will be stored in the frame's internal storage.
You can check them in the "Internal Storage" setting, or on the frame's music library.
16
To Next Page
Loading...
