EasyManua.ls Logo

Draminski DOD2 - Disinfection Requirements; Probe Cleaning Procedure; Washing and Disinfection Process; Correct Disinfectant Usage

Draminski DOD2
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30 SECTION 8 | DISINFECTION
The detector must be disinfected before and after each
test. Careful, thorough cleaning and disinfection of the
device is one of the most important conditions for proper
use.
We recommend wiping the probe with a gauze, cotton
cloth or even tissue to clean it of mucus, faeces, urine or
hair, especially around the electrodes.
Then it is best to wash it under running water and nally
immerse it in a disinfectant solution.
Always use disinfectants in the concentrations speci
-
ed by the manufacturer, as they can irritate the animal’s
mucous membrane and even damage the coating of the
measuring electrodes if used improperly. We recommend
that you wipe the probe before testing.
Note! Use a freshly prepared disinfectant solution before
using the device again.
DRAMIŃSKI S.A. would like to emphasize the impor
-
tance of keeping the detector clean. Carelessness in
this respect may lead to infection of the reproduc
-
tive tract. Wash, disinfect and dry the detector after
each use.