Draper Targa User Manual

Overview - Components
CAUTION
Read and understand all warnings
(Page 2) before beginning installation.
Contents
Overview - Components ............................................................................................... 1
Section 1 - Electrical Connections .............................................................................2
Section 2 - Operation....................................................................................................2
PLEASE READ - Safety Information ............................................................................ 2
Section 3 - Hanging Screen and Methods of Installation ....................................... 3
Section 4 - Limit Adjustments ..................................................................................... 4
Section 5 - Accessing Internal Low-Voltage Control Unit (LVC-IV) .........................5
Section 6 - Wiring Diagrams: Standard and Quiet Motor .......................................6
Section 7 - Wiring Diagrams: Motor with Internal Low-Voltage Controller .........7
Section 8 - Dimensions ................................................................................................8
Cable
Exit
Junction Box
(with cover)
Dowel
VIEWING SURFACE
CASE
CASE
VIEWING SURFACE
PERSONNEL
REQUIRED
TOOLS REQUIRED
POWER DRILL
PENCIL
TAPE MEASURE
HARDWARE (by others)
LEVEL
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2020 All Rights Reserved | FORM: Targa_Inst20
Targa
Electrically operated projection screen with motor-in-roller
INSTRUCTIONS
INSTALLATION & OPERATION
If you have any difficulties installing or servicing your
Targa Projection Screen, call your dealer or Draper
®
, Inc.

Draper Targa Specifications

General

Diagonal	106 \
Drive type	Motorized
Tensioned screen	No
Diagonal (metric)	269.24 cm
Native aspect ratio	16:9
Viewable screen width (W)	2336.8 mm
Viewable screen height (H)	1320.8 mm
Overall screen size (Height x Width)	162.56 x 243.84 cm
Mounting type	Ceiling
Product color	White
Easy to install	Yes
Quantity per pack	1 pc(s)
Input voltage	220 V

Summary

Overview and Components

Electrical Connections

Screen Operation

Important Safety Information

Before Beginning Installation

Read and understand all safety warnings and initial steps before commencing installation.

Hanging and Installation Methods

Wall Mounting

Instructions for securing the screen directly to a wall using appropriate hardware.

Suspended Mounting

Guidance on suspending the screen using S-hooks and chains from structural supports.

Optional Mounting Brackets

Details on using extension and floating brackets for wall or ceiling installations.

Recessed Installation

Procedures for recessing the screen, including trim kit considerations for drop ceilings.

Limit Adjustments

Standard/Quiet Motor Limits

How to adjust the down and up travel limits for standard and quiet motors.

ILT Motor Limits

Steps to set screen limits for ILT motors using the wall switch programming.

Accessing the LVC-IV Unit

Wiring Diagrams: Standard & Quiet Motor

Wiring Diagrams: ILT Motor

Product Dimensions