Vigor130 Series User’s Guide
37
Note: At present, the IPv6 prefix can be acquired via the PPPoE mode connection
which is available for the areas such as Taiwan (hinet), the Netherlands, Australia and
UK.
T
T
S
S
P
P
C
C
Tunnel setup protocol client (TSPC) is an application which could help you to connect to
IPv6 network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
(http://gogonet.gogo6.com/page/freenet6-account
) before you try to use TSPC for network
connection. TSPC would connect to tunnel broker and requests a tunnel according to the
specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6
prefix from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting modem advertisement daemon (RADVD), the PC
behind this modem can directly connect to IPv6 the Internet.
Available settings are explained as follows:
Item Description
Username
Type the name obtained from the broker. It is suggested for
you to apply another username and password for
http://gogonet.gogo6.com/page/freenet6-account
.
Password
Type the password assigned with the user name.
Confirm Password
Type the password again to make the confirmation.
Tunnel Broker
Type the address for the tunnel broker IP, FQDN or an
optional port number.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
