Vigor130 Series User’s Guide
67
one private IP address in the list to be the DMZ host.
When you have selected one private IP from the above
dialog, the IP address will be shown on the following screen.
Click OK to save the setting.
If you previously have set up WAN Alias for PPPoE/PPPoA or MPoA mode, you will find
them in Aux. WAN IP for your selection.
Available settings are explained as follows:
Item Description
Enable
Check to enable the DMZ Host function.
Private IP
Enter the private IP address of the DMZ host, or click Choose
PC to select one.
To Next Page
Loading...
