16
EN
Clean the Main Brush Clean the Side Brush
Clean the Main Wheel/Universal Wheel
Routine Maintenance
Press the brush guard clips inwards to remove the brush guard and lift the
brush out of the robot.
Pull out the side brushes and use the cleaning tool to remove any hair
tangled on the brush.
Pull out the brush covers as shown in the diagram. Use the included cleaning
tool to remove any hairs tangled in the brush.
Note: Do not pull out the hair tangled in the main brush excessively. Otherwise,
the brush may be damaged.
Note: Use a tool such as a small screwdriver to separate the axle and tire of the
universal wheel.
To Next Page
Loading...
Need help?
General
