14
EN
Clean the Dust Bin
Clean the Filter
Routine Maintenance
1. Open the robot cover, then press the dust
bin clip to remove the dust bin.
2. Open the bin cover and empty the
bin as shown in the diagram.
3. Clean the dust intake.
2. Do not wash the lter. Only the dust bin is washable. Thoroughly dry it before re-installing.
1. Remove the lter and tap its basket gently.
Note:
· Do not attempt to clean the lter with brushes or ngers.
· Rinse the dust bin with clean water only. Do not use any detergent.
· Use the dust bin and lter when they are completely dry.
· The lter is recommended to be cleaned every two weeks and replaced every three months.
* Clean after each use
To Next Page
Loading...
Need help?
General
