Dreame H13 Pro User Manual

7 87 8
EN EN
Installation
Assembly and Disassembly of Handle
Installing the Solid Waste Filter Basket
Insert the end of the handle vertically into the port on the top of the appliance as
indicated until you hear a click.
Remove the used water tank and pull up the tank cover to install the solid waste 󶀄lter
basket.
Note: To disassemble, press the contacts in the hole on the back of the appliance with the
appropriate tool and pull the handle upwards at the same time.
Note: If the solid waste 󶀄lter basket is not installed, other functions can operate normally except that
the solid waste cannot be separated.
Click
2
1
Charging
1.
Place the charging baseagainst a wallon level ground and connect it to a
powersource. Fully charge the appliance before 󶀄rst use.
2.
Place the appliance on the charging base. When charging, the number on the display
screen represents the current battery level as a percentage. When the number reaches
100, the battery is fully charged.
Note:
• If there is no operation within 10 minutes of being fully charged, the vacuum will enter sleep
mode. Please restart the appliance if you need to use it.
• To extend the battery life time, the battery keeps cooling down for about one hour automatically
after you have used the appliance for a long time.

Dreame H13 Pro Specifications

General

Turbo	Yes
Cleaning type	Dry&wet
Vacuum air filtering	-
Power source	Battery
Charging time	4 h
Suction power	18000 Pa
Battery capacity	4900 Ah
Maximum input power	300 W
Brush shape	Rectangular
Display type	LED
Product color	Black
Dust container type	Bagless
Liquid tank capacity	700 L

Weight and Dimensions

Weight	5600 g