10 11
How to Use
Working Methods
Method 1: Discontinuous Cleaning Mode
Press and hold the switch of the vacuum cleaner to start working, and release it to stop
immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the electronic lock key to switch to Continuous Cleaning mode, and then briey press
the on/o switch to make the vacuum cleaner in Continuous Cleaning mode.
Use the electronic lock to free your ngers and avoid nger fatigue caused by holding the
switch.
Note:
• In this mode, briey press the on/o switch to suspend the operation or start again，
and the working mode of the vacuum cleaner will not change.
• Click the electronic lock again to quit the Continuous Cleaning mode.
Continuous
Cleaning Mode
There are two working methods for the vacuum cleaner, which can be selected based on
your needs.
Using Dierent Attachments
Smart Multi-brush Bar
For cleaning oors such as marble, tile,
and short pile carpet. When Auto mode
is activated, the vacuum cleaner can
automatically adjust its suction level
depending on the surface type.
Mini Electric Brush
For vacuuming dirt, pet hair, and other
stubborn debris from sofas, bedding, and
other fabric surfaces.
2-in-1 Brush Nozzle
For vacuuming curtains, keyboards,
ceilings, sofas, vehicle interiors, coee
tables, etc.
Crevice Nozzle
Suitable for vacuuming cracks, corners of
doors and windows, stairs, and other hard-
to-reach places.
Note: The smart multi-brush bar can be
attached directly to the vacuum cleaner.
Note: It is not recommended to vacuum on
the fragile surfaces, such as silk.
How to Use
To Next Page
Loading...
Need help?
General
Weight and Dimensions
