12 13
Extension Hose
Use for hard-to-reach corner cleaning.
How to Use Care & Maintenance
Tips:
Cleaning the Vacuum Cleaner
Cleaning the Dust Compartment, Pre-lter, and Cyclone Assembly
1. Always use genuine parts to keep your warranty from being voided.
2. If the lter or nozzle becomes clogged, the vacuum cleaner will stop working shortly
after being turned on. Clear the tube to restore functionality.
3. If the vacuum cleaner will not be used for an extended period, fully charge it, unplug its
charger, and store it in a cool, low-humidity environment away from direct sunlight. To
avoid over-discharging the battery, recharge the vacuum cleaner at least once every 3
months.
Wipe the vacuum cleaner with a soft dry cloth.
The vacuum cleaner's cleaning ability will be reduced if the dust compartment is lled to
the "MAX" mark. To regain performance, empty the dust compartment in a timely manner.
Before emptying the compartment, make sure the vacuum cleaner is disconnected from
the power, and do not press its power button.
2. Push the dust compartment release switch in the direction indicated by the arrow, then
gently remove the dust compartment from the vacuum cleaner.
1. Press the dust compartment bottom cover release button, then empty the contents.
2
1
Note:
• If any rotating part becomes stuck, the vacuum cleaner may shut o automatically.
Remove any trapped foreign objects, then resume use.
• When the motor runs overheated, the vacuum cleaner will automatically shut o. Wait
until the battery temperature returns to normal, then resume use.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
