Note: If you want to reset Wi-Fi, press and hold the button for 3 seconds
or repeat step 2 and then follow the prompts to finish the Wi-Fi connection.
Connecting with Dreamehome App
1. Download Dreamehome App
2. Add Device
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
QR code
QR code
Note:
· Only 2.4 GHz Wi-Fi is supported.
the directions in this manual. Please follow the instructions based on the
current app version.
Open the Dreamehome app, tap " " in the upper right corner, and
scan the same QR code on the robot again to add the device. Please
follow the prompts to finish the Wi-Fi connection.
EN
11
To Next Page
Loading...
