How to Use
Pause/Sleep Mode
When the robot is running, press any button to pause it. If the robot is paused for
more than 10 minutes, it automatically enters sleep mode. All indicators on the
robot.
Scheduled Cleaning
You can schedule cleaning time in the Dreamehome app. The robot will
automatically start cleaning at the designated time and then return to the
charging dock to recharge when the cleaning is done.
Start Cleaning
Press the button to start cleaning after the robot is turned on. Then, the robot
will methodically clean each room in an S-shaped pattern, then finish by
cleaning along the edges and walls to ensure a thorough job.
Press and hold the button for 3 seconds to turn on the robot. The power
indicator should be illuminated. Place the robot onto the charging dock, the
move the robot away from the dock and press and hold the button for 5
seconds.
Robot Restarting
button
for 3 seconds to turn the robot on.
Note: It is recommended that the robot set out from the charging dock
before cleaning. Do not move the charging dock while the robot is cleaning.
This ensures that the robot returns to charging dock smoothly.
Note: If the robot is paused and placed onto the charging dock, the current
cleaning task will end.
Spot Cleaning
In this mode, the robot will clean a circular area with a radius of 0.8 meters.
When the spot cleaning is done, the robot will automatically return to its original
location and stop working.
EN
12
To Next Page
Loading...
