Routine Maintenance
Clean the Main Brush
1. Press the brush guard clips upwards to remove the brush guard and
lift the brush out of the robot.
Note: Do not pull out the hair tangled in the main brush excessively.
Otherwise, the brush may be damaged.
2. Use the provided cleaning tool to remove any hair tangled in the brush.
Pull out the side brush and use the provided cleaning tool to remove any hair
tangled in the brush.
Clean the Omnidirectional Wheel
Clean the Side Brush
Note:
· Use a tool such as a small screwdriver to separate the axle and tire of the
omnidirectional wheel.
· Rinse the omnidirectional wheel under the running water and put it back
after drying it completely.
EN
15
To Next Page
Loading...
