Use Mopping Function
1. Fill the water tank with clean water.
Note: Do not use detergent or disinfectant.
It is recommended that all floors are vacuumed at least three times before the first mopping session to achieve a better cleani
How to Use
It is not recommended to use the mopping function on carpets.
Use the app to adjust the water flow as required.
Note:
4. Slide the 2-in-1 water tank with dust box and mop assembly into the robot
until it clicks into place. Press the button or use the Dreamehome app to start
cleaning.
2. Dampen the mop pad and wring out excess water. Install the mop pad as
shown in the diagram.
①
②
3. Install mop assembly.
·
·
EN
13
To Next Page
Loading...
