DREAMS Jay - Assembling the Slat Frame

Jay Ottoman Bed - Assembly guide - Page 9
To top of frame (I or M), fit two connection plates (g) using four bolt
sets (f, b & c), screw into the threaded inserts on top of the frame.
Do not tighten any bolts yet.
iii)
ii)
F
I
T
C
R
O
S
S
B
A
R
H
E
R
E
L
L
f
c
b
L
f
c
g
b
I
M
M
I
Double & King Size
Super King Size
Super King Size
Double & King Size
5
x6
b
x6
c
d
x1
x6
f
g
x2
Fitting location for the strengthening
cross bar (L) is clearly labeled on the
sides of the slat frame (I or M). Pass the
bar through the gap between first &
second slat.
Carefully open the frame.
i)
The cross bar fixing plates sit on top of each side of the slat
frame, sit the plates on the round labels. Align with the
threaded holes and loosely fix through the plates using the
bolt sets as in step (ii). Make sure frame is flat on the floor.
Using Allen key (d) tighten all six bolt sets 100%.
Fit the metal s
lat frame by following the next steps.