35
LOCAL AREA NETWORK (LAN) CONNECTION USING A ROUTER
Scenario 3: Connecting the Dremel LC40 Laser Cutter to one or more computers
using a router with wireless and/or Ethernet Connection.
In this scenario, the user does have an Internet connection through the router.
• One or more computers access the Dremel LC40 Laser Cutter as well as the Internet
through the Router.
• The Dremel LC40 Laser Cutter gets access to the Internet from Router.
Note: The Dremel LC40 Laser Cutter does have the option to set a Static IP address
using the LCD software interface OR the Router can assign a Static IP address.
Scenario 4: Connecting two or more Dremel LC40 Laser Cutters to one or more
computers using a router with wireless and/or Ethernet Connection.
SETUP
To Next Page
Loading...
Need help?
General
