72
Laser Cutting / Engraving Prohibited Uses & Restrictions
The Dremele LC40 Laser Cutter may be used only for lawful purposes. Dremel does
not recommend nor endorse the use of the Dremel LC40 Laser Cutter to create
material that is:
i. Prohibited by local, state or federal law;
ii. Unsafe, harmful, dangerous, poses an immediate threat to the well-being of
self/others, or is otherwise inappropriate for the environment; or
iii. In violation of another's intellectual property rights. For example, the Dremel
LC40 Laser Cutter will not be used to reproduce material that is subject to
copyright, patent or trademark protection.
iv. Used as a structural component - The use of parts made must be thoroughly
evaluated by a competent professional prior to being included in any structure;
or
v. In contact with or consists of food; Prior material use may transfer and
contaminate food.
Never attempt to cut or engrave human or animal tissue.
OPERATING THE LASER CUTTER
To Next Page
Loading...
Need help?
General
