Dremel DIGILAB LC40 - LASER CUTTER & HEX BOX CLEARANCE REQUIREMENTS; Clearance Diagram

9
X
8”
(203mm)
Min.
8”
(203mm)
Min.
WALL
30”
(762mm)
Laser Cutter
8”
(203mm)
Min.
8”
(203mm)
Min.
Hex Box™
Laser Cutter
Y
DREMEL LC40 LASER CUTTER & HEX BOX™ CLEARANCE REQUIREMENTS
SPECIFICATIONS
X – must be at least 26" (660 mm) when using onboard fan and at least 10" (254 mm)
when using external booster fan. See Exhaust Management section (p. 24) for details.
Y – 6" (152 mm) min. bend radius. See Exhaust Management section (p. 24) for details.
DM 1600A01CX8 08-18 LC40 EN.qxp_LC40 8/17/18 10:32 AM Page 9