30
Drufomat scan
2. Technical data
30
Dimensions (H x W x D): 460 x 290 x 290 mm
Weight: 16 kg
Supply Voltage: 100-240 V/50-60 Hz
Max. power consumption: 115V-270 W, 230 V-315 W
Fuse of unit: T 3,15 A
Operating pressure: 29-87 psi (2-6 bar)
Min. operating pressure: 29 psi (2 bar)
Max. pressure in pipe: 145 psi (10 bar)
1. Description of unit
The Drufomat scan is a universally
usable pressure thermoforming unit
for daily use in the dental laboratory.
An integrated scanner allows a direct
taking over of product names, blank
thicknesses as well as individual heating
and cooling times by means of a bar-
code that can be found on each blank
package.
A variably adjustable forming pressure
of 29-87 psi (2-6 bar) in connection
with a vertically forming blank guar-
antees for very precise results.
In combination with optionally available
inserts the Drufomat scan can also be
used as flask press (P insert) and as
pressure pot (D insert).
To Next Page
Loading...