Dreve Drufomat scan - Drufomat Scan Declaration of Conformity

31
deutschenglishfrançaisespañolitaliano
31
According to Machinary Directive (2006/42/EG)
Herewith we declare that the machine described below is in its conception and design and in the shape
delivered by us in accordance with the fundamental requirement for safety and health as prescribed in
the applicable EC-guidelines. In the case of any change or modification of the machine not authorised
by us this declaration becomes invalid.
Designation of machine: Drufomat scan
D-3300 / D-3300-1 / D-3300-2
Type of machine: Pressure thermoforming unit
Applicable EC-guidelines:
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC EMC Directive
Applied harmonised standards:
2006/42/EG According to Machinary Directive
EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assess-
ment and risk reduction (ISO 12100:2010); German version EN ISO
12100:2010.
EN ISO 13732-1:2008 Ergonomics of the thermal enviroment - Methods for the assessment
of human responses to contact with surfaces – Part 1: Hot surfaces
(ISO 13732-1:2006); German version EN ISO 13732-1:2008-12.
EN 60204-1:2006/A1:2009 Safety of machinery – Electrical equipment of machines – Part 1:
Gen-eral requirements (IEC 60204-1:2005/A1 2008); German version
EN 60204-1:2006/A1:2009.
2006/95/EG Low Voltage Directive
EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control
and laboratory use – Part 1: General requirements (IEC 61010-1:2010
+ Cor.: 2011); German version EN 61010-1:2010.
2004/108/EG EMC Directive
EN 61000-3-2:2006 +
A1:2009 + A2:2009 Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits for
harmonic current emissions (equipment input current <= 16 A per
phase) (IEC 61000-3-2 :2005 + A1:2008 + A2:2009); German ver-
sion EN 61000-3-2:2006 + A1:2009 + A2:2009.
EN 61000-3-3:2008 Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voItage changes, voItage fluctuations and flicker in public Iow-voltage
supply systems, for equipment with rated current <= 16 A per phase
and not subject to conditinoal connection (IEC 61000-3-3:2008; Ger-
man version EN 61000-3-3:2008.
EN 61326-1:2006 Electrical equipment for measurement, control and laboratory use –
EMC requirements; Part 1: General requirements (IEC 61326-1:2005);
German version EN 61326-1:2006 Emission according to living area,
business and industrial undertakings as well as small enterprises inter-
ference stability according to industrial area.
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · E-mail: info@dreve.de · www.dreve.com
3. Declaration of Conformity