Dri-Eaz BD1000 User Manual

07-01742C F435-DV (110–230V UK) 1 Legend Brands Holdings, Ltd.
Owner’s Manual
Dri-Eaz
®
Building Dryer BD1000
F435-DV (110–230V UK)
Legend Brands Holdings, Ltd.
22 Plover Close, Interchange Park, Newport Pagnell, MK16 9PS
Tel: +44 (0)1908-611-211 Fax: +44 (0)1908-611-363 www.dri-eaz.co.uk
WARNING: Read and understand these warnings and instructions.
DO NOT operate the unit with covers open or removed.
WARNING: Do not alter or modify your BD1000 in any way. Use only replacement
parts authorized by Dri-Eaz Products. Modifications or use of unapproved parts
could create a hazard and will void your warranty. Contact your authorized Dri-
Eaz distributor for assistance.
WARNING:
Unplug before servicing.
WARNING: ELECTRIC SHOCK HAZARD
Unplug before opening cover.
Use with a residual current device (RCD) where possible.
Ensure power cord is properly earthed.
Check that power cord is not damaged.
Unplug before opening cover.
WARNING:
Moving parts may injure hands. Unplug before servicing.
WARNING:
Surfaces may be hot. Allow unit to cool before servicing.

Dri-Eaz BD1000 Specifications

General

Model	BD1000
Power Supply	115V/60Hz
Refrigerant	R410A
Water Removal (at 80°F/60% RH)	100 PPD
Operating Temperature Range	33°F to 100°F
Dimensions (H x W x D)	28" x 18" x 19"
Dimensions (L x W x H)	12 in x 18 in x 23.5 in
Net Weight	45 lbs
Power	115V

Summary

Safety Warnings

General Safety Instructions

Read and understand warnings, do not operate with covers open, do not alter or modify the unit.

Electrical Safety

Unplug before servicing, use RCD, ensure proper earthing, check cord for damage.

Initial Installations

Handle Installation

Steps to attach the handle to the dryer unit, securing it with screws and nuts.

Drain Hose Installation

Instructions for connecting the interior drain hose and exterior hose to the unit.

Power Setup

Voltage Selection and Connection

Select voltage, plug in power cord, secure cable strain relief, and close cover.

Resetting After Incorrect Voltage

Procedure to reset the electrical system after incorrect voltage selection.

Fuse Replacement

User Controls and Operation

Control Panel and Outlets

Purge Pump Operation

Cleaning and Maintenance

Safety Precautions for Cleaning

Filter Care

Unit Cleaning Procedures

Pumpout Cleaning Procedure