SETUP
Place the dehumidifier in the damp area.
Close doors and windows to
limit moisture entering from
surrounding areas.
Remove drain hose from pocket, un-
coil and lay the hose flat on the floor.
Attach “quick connect” end of hose to
back of dehumidifier. Place open end
securely in a suitable drain.
Remove cord from cord pocket, uncoil,
and plug one end into the base of the
unit. Plug the other end into an outlet
on a 15 or 20 amp circuit.
OPERATION
Press ON/OFF to turn the unit on.
The unit automatically pumps out
water at least every six minutes.
OTHER FUNCTIONS
DISPLAY MENU. Press to display air
inlet and outlet conditions, and display
settings. To return to the main menu,
press the ON/OFF key once.
OVER
Operating the LGR 7000XLi Dehumidier
To Next Page
General
