DRIFT GHOST 4K Quick Guide

EN 4
Module Removal
Before removing a
module, please ensure
that the camera is
powered o.
If your camera has
a module docked,
remove by following
these instructions:
1. Place index finger
onto the module
notch.
2. Pull outwards,
pivoting on the
module.
Dethatching the
module exposes the
female connector and
module dock area.
A tool may be used
alternatively to
remove the module.

DRIFT GHOST 4K Specifications

General

Connectivity	Wi-Fi, Bluetooth
Image Sensor Size	1/2.3 inch
Sensor Resolution	12MP
Weight	120g
Image Stabilization	Electronic Image Stabilization (EIS)
Resolution	3840 x 2160
Battery Life	Up to 3 hours
Waterproof	with external case
Storage	MicroSD card up to 128GB
Lens	140° wide-angle lens
Dimensions	43mm (H) x 82mm (W) x 31mm (D)