ww w.drilldoctor.com20
Oversplit
Solution
Reinsert the chucked bit into the
Sharpening Port and remove enough
of the tip until the split tip looks like
the correctly split bit above.
Grit Tube Attachment
The Grit Tube attachment is
designed to keep any sparks
caused by sharpening safely
inside the machine and away
from you. In addition, the Grit
Tube reduces the sharpening
dust in the air and on your
workbench.
Simply insert the Grit Tube
into the Splitting Port of
your Drill Doctor when
sharpening. It will catch the grit that is formed from the sharpening
process. Clean the inside of your Drill Doctor and the Grit Tube on
a regular schedule. The grit tube is designed to accept a standard
1-1/4” shop vacuum for extended periods of sharpening.
Too much material
removed.
Split lines are joined
in the center and
Chisel Edge has
been removed.
Never clean with an air compressor, it may damage the
machine. Use a brush or vacuum.
To Next Page
Loading...
