Need help?Do you have a question about the DriSteem XTP 006 and is the answer not in the manual?
General| Voltage | 208-240V, 480V, 600V |
|---|---|
| Frequency | 50/60 Hz |
| Humidification Capacity | 6 lb/h (2.7 kg/h) |
| Steam Output | 6 lb/h (2.7 kg/h) |
| Capacity | 6 lb/h (2.7 kg/h) |
| Phase | 1 |
| Power Consumption | 6 kW |
| Water Connection | 1/2" NPT |
| Drain Connection | 1/2" NPT |
Installation must be done by qualified personnel; read manual before installation.
Emphasizes reading manual before service/maintenance to avoid property damage or injury.
Warns of extremely hot surfaces and steam; advises cool-down before service to prevent burns.
Crucial safety step to prevent shock, fire, or injury; disconnect power before any work.
Warning about severe injury or death from electrical shock if humidifier starts during maintenance.
Table listing electrical specifications and recommended fusing for different XT Series models.
Guidelines for choosing an optimal installation site, considering proximity, elevation, and clearances.
Details keyhole locations and dimensions for mounting XT Series humidifiers on walls.
Step-by-step guide for installing the steam cylinder, including connections and precautions.
Instructions for supply water and drain piping, covering materials, codes, and safety.
Guidelines and warnings for field wiring the humidifier, including conduit and component placement.
Crucial recommendations for sensor location to ensure accurate humidity control and performance.
A comprehensive checklist of pre-operation verification steps for the XT Series humidifier.
Essential safety procedures for shutting down and cooling the humidifier before maintenance tasks.
To Next Page
