Need help?Do you have a question about the DriSteem XTP 017 and is the answer not in the manual?
General| Model | XTP 017 |
|---|---|
| Type | Steam humidifier |
| Capacity | 17 lbs/hr (7.7 kg/hr) |
| Water Connection | 1/2 in. NPT |
| Weight | 85 lbs |
Covers general warnings, cautions, and specific hazards like electrical shock and hot surfaces.
Focuses on warnings relevant to qualified installers and proper installation procedures.
Table detailing line currents and recommended fusing for XT Series models.
Guidelines for choosing the optimal site considering proximity, environment, and clearances.
Specifies requirements for electrical connections, piping, and wall insulation.
Detailed instructions for mounting the humidifier securely on a wall.
Step-by-step guide for installing the steam cylinder, including connections.
Guidelines for connecting supply water and drain piping, including safety precautions.
Guidelines for wiring, conduit knockouts, and component placement.
Essential information on safety earth grounding systems.
Explains why sensor location is critical for performance and lists recommended locations.
Specifies required pitch for Rapid-sorb components.
Detailed explanation of how the XT Series humidifier generates and controls steam.
A comprehensive checklist and procedures for initial operation.
Essential procedures for safely shutting down and cooling the unit.
Complete guide for replacing the steam cylinder.
General troubleshooting approach and Model XTP specific guidance.
Common problems, causes, and actions for Model XTP humidifiers.
To Next Page
