Drive 14360-P - Advanced Functions & Mattress Details

10
PRODUCT FUNCTION
Static mode (6)
• Press to set the system to static therapy mode. The system will revert to the previously set
alternation mode after 120 minutes.
Auto Firm (7)
• Press to set the air mattress to quick ination mode, which facilitates nursing and caring.
The system will revert to the previously set therapy mode after 30 minutes.
  SeatInate(8)
• Press to set the air mattress to seat (fowler) mode. The pressure value will increase by
5mmHg to facilitate more comfortable seating.
Lock button (9)
• Auto: control unit panel automatically locks in 5 minutes without operation.
• Manual: press lock button for 3 seconds to lock the panel, press again for 3 seconds to
unlock the panel.
Mattress
The Med Aire Edge Mattress Replacement comes with a hose connection at the foot end of the mattress
and 20 individual air cells encapsulated in a high-density foam shell. The cell material, polyurethane and
nylon blend, provides a specialty surface that conforms to the specic shape of the patient, minimizing
soft tissue distortion, reducing bone penetration into muscle fascia, and promoting improved blow ow
compared to traditional surfaces.
  CPRdeationvalve
• Pull the red CPR strap to release the air immediately from the mattress for rapid deation.
Deation time varies depending on patient weight and prole.
Quick Connector
• Used to connect the therapy mattress to the control units.
(4)
(5)(6)(7)(8)
(2)
(1)
(9)
(3)