Drobo 5C User Guide
106
3. Select the Dual Disk Redundancy check box to enable it, or clear it to disable Dual
Disk Redundancy.
A message box automatically appears, asking you to confirm the change and letting
you know that the protected capacity on your Drobo device will decrease (if enabling
Dual Disk Redundancy) or increase (if disabling).
4. Click the Yes button in the dialog box to continue.
5. In the General Settings page, click the OK button.
If you are enabling Dual Disk Redundancy, an "In Progress" status bar may appear on
the Status page, letting you know that data protection is in progress. This may take
some time.
Related topics:
Determining Drive Space Requirements
Dimming the Lights on Your Drobo 5C
To Next Page
Loading...
