Drobo 5C - Blinking Lights for Connectivity Test

Drobo 5C User Guide 99
1.4.6 Blinking Lights to Test Connectivity
A simple test to verify that your Drobo 5C is connected, directly or indirectly, to your
host computer is to use Drobo Dashboard to blink the lights on your Drobo device.
1. In the All Drobos page, select the Drobo 5C whose connectivity you would like to
check.
2. Click the Tools option on the Navigation menu.
The Tools page for that Drobo 5C opens.
3. In the Drobo Operations area, click the Turn Blink Lights ON option.
The drive lights on your Drobo 5C blink red and green alternatively for 15 seconds.
Related topic:
Understanding the Indicator Lights