Drobo 5C - Page 132

Drobo 5C User Guide
132
● Product ID - The product ID for the selected drive.
● Serial # - The serial number of the selected drive.
● Firmware - The firmware version for the selected drive.
● Health - The health status of the drive, based on the errors identified by Drobo while
using the drive. Values include:
• Failed (blinking red) - Indicates that the drive has failed and needs immediate
replacement.
• Warning (orange) - Indicates that the drive is almost full and you need to add
capacity soon.
• Critical (red) - Indicates that the drive is full and you need to add capacity now.
• Healed
• Good (green) - Indicates that the drive is healthy and no action is needed.
● Capacity - The device capacity, in terabytes.
● Drive Type – options include SSD or HDD.
● Drive Interface – The drive type. It can take one of the following
values: SATA/Unidentified.
Related topic:
Checking Storage Usage and Device Status Information