Drobo 5C - Page 52

Drobo 5C User Guide 52
● In the Software Updates area of the Tools page, click the Check for Updates option.
● If needed, follow the same steps to ensure the Drobo 5C has the latest firmware.
3. Safely shut down the Drobo/Drobo S and the Drobo 5C. For steps, see Safely Shutting
Down Your Drobo 5C
4. Remove ALL drives from the Drobo or Drobo S and insert ALL drives into the Drobo
5C.
5. Turn the Drobo 5C back on by pressing its power toggle button.
The Drobo 5C may take a few minutes to boot up. When finished, all the data and
volumes will be available on the Drobo 5C as it was on the Drobo/Drobo S.
Note:
You can also follow these steps to migrate a disk pack from one Drobo 5C to
another Drobo 5C.
Related topic:
Migrating Your Data between Drobo Products