DROPSA VIP5 Pro - 9. Setup Programming; 9.1 Navigating the Setup Menu

21/27
9. SETUP PROGRAMMING
The following section explains how to navigate the VIP5 Pro setup menus and contains detailed explanation of each
parameter and possible values.
9.1 Navigating around the setup menu.
The navigation map below shows how to navigate around the setup menu.
OPERATING
SETUP PARAMETERS
VALUES
To enter the SETUP menu from the OPERATING Mode, hold the (Mode) button for 5 seconds.
The (Up and Down) keys allow scrolling through the parameters.
By pressing the Mode button again, the indicated parameter value can be modified by using the Up and Down keys.
To exit, use the (OK) key, or (Esc) if you with to exit without saving.
LUBE sep: 1
01m56s STOP
5 sec
MODE -Cycle-
SET - - NEXT
MODE -Cycle-
SAVE - +
OR
set value
save
parameters
no save
parameters
save
parameters
no save
parameters
OR
saved
value
not saved
value
LUBE Type SEP
SAVE - +
OR
set value
OR
not saved
value
saved
value
LUBE Type SEP
SET BACK NEXT
+
SETUP MODE