13
How to use a Global Keypad?
The Global Keypad will display the message
ENTER YOURENTER YOUR
ENTER YOURENTER YOUR
ENTER YOUR
ACCESS CODEACCESS CODE
ACCESS CODEACCESS CODE
ACCESS CODE
or the full system status will be displayed if the global
system status option is enabled, or the clock will be
displayed if global clock display is enabled. From this
state any user entering a valid access code with the
global access attribute enabled on their code, may
access the system. The system can be directed to
perform functions such as arming/disarming and all [✱]
mode functions. No function can be performed without
first entering a valid access code.
• Single Partition Access Code
ENTER YOURENTER YOUR
ENTER YOURENTER YOUR
ENTER YOUR
ACCESS CODEACCESS CODE
ACCESS CODEACCESS CODE
ACCESS CODE
The user enters a valid single partition access code.
[*] TO VIEW[*] TO VIEW
[*] TO VIEW[*] TO VIEW
[*] TO VIEW
< >< >
< >< >
< >
SYSTEM TROUBLESSYSTEM TROUBLES
SYSTEM TROUBLESSYSTEM TROUBLES
SYSTEM TROUBLES
This message will be displayed if there are troubles on
the system and the installer has enabled the option
“GLB KYPD TRB” in the system toggles section.
VIEW TROUBLEVIEW TROUBLE
VIEW TROUBLEVIEW TROUBLE
VIEW TROUBLE
< >< >
< >< >
< >
(trouble message)(trouble message)
(trouble message)(trouble message)
(trouble message)
Press [✱] to view the troubles on the system. The user
can scroll through the troubles by using the [<][>] keys.
(Partition label)(Partition label)
(Partition label)(Partition label)
(Partition label)
[*] TO ARM[*] TO ARM
[*] TO ARM[*] TO ARM
[*] TO ARM
< >< >
< >< >
< >
This message will be displayed if the partition is ready
to be armed. Press the [✱] key to arm.
WARNINGWARNING
WARNINGWARNING
WARNING
BYPASS ACTIVEBYPASS ACTIVE
BYPASS ACTIVEBYPASS ACTIVE
BYPASS ACTIVE
This message will be displayed for 3 seconds if the
partition is armed with zones bypassed.
PARTITION ARMEDPARTITION ARMED
PARTITION ARMEDPARTITION ARMED
PARTITION ARMED
WITH OPEN ZONESWITH OPEN ZONES
WITH OPEN ZONESWITH OPEN ZONES
WITH OPEN ZONES
This message will be displayed for 3 seconds if the
partition is armed with force armable zones open.
EXIT DELAYEXIT DELAY
EXIT DELAYEXIT DELAY
EXIT DELAY
IN PROGRESS...IN PROGRESS...
IN PROGRESS...IN PROGRESS...
IN PROGRESS...
This message will be displayed for 3 seconds when a
partition is armed.
ENTER YOURENTER YOUR
ENTER YOURENTER YOUR
ENTER YOUR
ACCESS CODEACCESS CODE
ACCESS CODEACCESS CODE
ACCESS CODE
After the exit delay in progress message has been
displayed the keypad will return to this message.
(Partition label)(Partition label)
(Partition label)(Partition label)
(Partition label)
<<
<<
<
>>
>>
>
* FOR OPEN ZONES* FOR OPEN ZONES
* FOR OPEN ZONES* FOR OPEN ZONES
* FOR OPEN ZONES
If the partition is not ready to be armed because of open
zones on the partition, this message will be displayed.
ZONE OPENZONE OPEN
ZONE OPENZONE OPEN
ZONE OPEN
< >< >
< >< >
< >
(Zone label)(Zone label)
(Zone label)(Zone label)
(Zone label)
OO
OO
O
Press the [✱] key to view the open zones on the
partition. Open zones can be viewed by pressing the
[<] [>] keys.
[*]TO BYPASS[*]TO BYPASS
[*]TO BYPASS[*]TO BYPASS
[*]TO BYPASS
ALL OPEN ZONESALL OPEN ZONES
ALL OPEN ZONESALL OPEN ZONES
ALL OPEN ZONES
After all open zones have been viewed the user will be
given the option to bypass all open zones. To bypass
all open zones press the [✱] key.
(Partition label)(Partition label)
(Partition label)(Partition label)
(Partition label)
<<
<<
<
>>
>>
>
UNABLE TO ARMUNABLE TO ARM
UNABLE TO ARMUNABLE TO ARM
UNABLE TO ARM
This message will be displayed if the partition is not
ready to be armed because of something other then
open zones on the partition.
(Partition label)(Partition label)
(Partition label)(Partition label)
(Partition label)
[*] TO DISARM[*] TO DISARM
[*] TO DISARM[*] TO DISARM
[*] TO DISARM
< >< >
< >< >
< >
This message will be displayed if the partition is armed.
NO ALARMSNO ALARMS
NO ALARMSNO ALARMS
NO ALARMS
IN MEMORYIN MEMORY
IN MEMORYIN MEMORY
IN MEMORY
Press the [✱] key to disarm the partition. If the partition
is disarmed and no alarms occurred during the current
armed period this message will be displayed for 3
seconds.
ALARM MEMORYALARM MEMORY
ALARM MEMORYALARM MEMORY
ALARM MEMORY
< >< >
< >< >
< >
(partition label)(partition label)
(partition label)(partition label)
(partition label)
If the partition is disarmed with alarms in memory, this
message is displayed. Press the [<][>] keys to scroll
through the partitions that have alarm memory on them.
[*]FOR OTHER[*]FOR OTHER
[*]FOR OTHER[*]FOR OTHER
[*]FOR OTHER
OPTIONSOPTIONS
OPTIONSOPTIONS
OPTIONS
< >< >
< >< >
< >
If the user wishes to perform a function to a partition
that is not available through the global menu, the
keypad can be loaned to the desired partition be
pressing the [✱] key at this option.
ACCESSINGACCESSING
ACCESSINGACCESSING
ACCESSING
(Partition label)(Partition label)
(Partition label)(Partition label)
(Partition label)
When a keypad is loaned to another partition this
message will be displayed for 3 seconds. Once the
keypad is loaned to another partition, it will function as
if it was a keypad that belonged to that partition. The
user will be able to perform all [✱] functions (e.g. [✱] [7]
Door Strike) and disarm the panel using conventional
methods.
EXITING FROMEXITING FROM
EXITING FROMEXITING FROM
EXITING FROM
(Partition Label)(Partition Label)
(Partition Label)(Partition Label)
(Partition Label)
The keypad will return to global mode after 20 seconds
of no key presses made (this time is programmable by
the installer). The keypad will also return to global mode
if the [#] key is pressed. This message will be displayed
for 3 seconds then the keypad will return to global mode.
To Next Page
Loading...
Need help?
General
