DSC Neo Power HS2016

To Next Page

To Previous Page

Chapter 3

DLS- 3 allows for the ability to upload status reports from control panels, as well as print and view reports about the security sys-

tem. Additionally, DLS- 3 can execute batch files to perform preprogrammed functions on a security system.

- 14 -

Main Page

Table of Contents2
Quick Reference4
Understanding Your Keypad5
Icon and LED Keypad Symbols5
Keypad Models5
Securing the Premises7
Setting the Alarm System7
Alarm System Setting Methods7
Setting the System (Infinite Exit Delay)7
Away Setting the System with the Keypad7
Night Setting the System with the Keypad8
Entry Setting8
Silent Exit Delay9
Stay Setting the System with the Keypad9
Leaving When the System Is Already Set - Quick Exit9
Setting the System with a 2-Way Wireless Key10
Bypassing Zones10
Additional Bypass Features10
Bypass Groups12
Setting Errors and Exit Faults12
Setting Errors12
Audible Exit Faults13
To Correct an Exit Fault13
Alarm System Unsetting Methods13
Unsetting the System13
Engineers Reset13
Downloading Enable13
The Powerseries Neo Security System15
General System Operation15
Carbon Monoxide Detection15
Fire Detection15
Testing Your System15
Monitoring15
Maintenance15
Emergency Keys17
Alarms17
Fire Alarm17
Carbon Monoxide Alarm - 4 Beeps, Long Pause, 4 Beeps17
Intrusion (Burglary) Alarm - Continuous Siren17
Alarm Cancel Window17
Viewing Alarms in Memory18
Alarm Messages18
Resetting Smoke Detectors18
Wireless Keys and Other Devices19
Using 2-Way Wireless Keys19
Pg8929/Pg992919
Pg8939/Pg993919
Using Proximity Tags19
SMS Command and Control19
Using the Keypad to Lookup the Number to Call for SMS Commands19
Sending SMS Commands to Your System20
SMS Commands20
SMS Responses from Your System21
Managing Users22
Access Code Types22
Adding, Changing and Deleting Access Codes23
Enrolling and Deleting Proximity Tags23
Naming a User24
Assigning a Partition to a User Code24
Configuring Additional User Options24
User Functions26
Event Buffer26
Setting the Time and Date26
Enabling/Disabling the Auto Set/Unset Feature26
Setting the Auto Set Time26
Allowing the Installer to Service Your System Remotely - DLS27
User Callup27
Late to Open27
Changing the Brightness of the LCD Keypad28
Changing the Contrast of the LCD Keypad28
Setting the Buzzer Volume28
Setting the Voice Prompt Volume28
Setting the Voice Chime Volume28
Resetting the System29
Engineer's Reset29
Remote (Anti-Code) Reset29
User's Walk Test29
Full System Walk Test29
Trouble Conditions30
Managing Partitions33
Partitions33
Single Partition Operation33
Loaning a Keypad to Another Partition33
Fire and CO Zone Types33
Additional Features34
Turning the Chime ON/OFF34
Audio Verification34
Visual Verification34
System Lockout Due to Invalid Attempts34
Command Outputs34
Burglary Verification34
Swinger Shutdown35
Call Waiting35
Fire Alarm Verification35
Regulatory Agency Statements36
Installer Warning37
Safety Instructions38
Regular Maintenance and Troubleshooting38
Cleaning38
Troubleshooting38
Applicable Models38
Eula39
Locating Detectors and Escape Plan41
Smoke Detectors41
Fire Escape Planning41
Carbon Monoxide Detectors42
Reference Sheets43
System Information43
Service Contact Information43
Access Code and Sensor/Zone Information44

DSC Neo Power HS2016

Table of Contents

Related product manuals