DSC Neo Power HS2016 User Manual

Chapter 4
l Use the system test described in “Testing Your System” to check the battery condition. We recommend, however, that the
standby batteries be replaced every 3-5 years.
l For other system devices such as smoke detectors, passive infrared, ultrasonic or microwave motion detectors or glass-
break detectors, consult the manufacturer’s literature for testing and maintenance instructions.
- 16 -

DSC Neo Power HS2016 Specifications

General

Power Supply	16.5 VAC, 40 VA
Operating Temperature	0°C to 49°C (32°F to 120°F)
Event Buffer	500 events
PGM Outputs	2
Communications	PSTN
Humidity	Up to 85% non-condensing
Keypads	Up to 8