DSC New Classic PC585 - Access Codes

3
The Exit Delay Time is __________seconds.
The Entry Delay Time is __________seconds.
For Service
Central Station Information:
Installer Information:
Access Codes
Access codes are used to arm and disarm the system. There are 33 access codes
available: 1 Master Code and 32 regular access codes.
Only the Master Code can be used to program additional security codes and to change
other system features as well as to arm and disarm the security system. The Master Code
will be supplied to you by your installer. All keypad entries are made by pressing one key at
a time. All access codes can be programmed by following the procedure outlined in
“Programming Security Codes” on page 10.
NOTE: An access code can be a four or six digit number depending on how your
installer has programmed your system. Ask your installer for more information
regarding access codes.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
[F] FIRE
[A] AUXILIARY
[P] PANIC
Account #: Telephone #:
Company: Telephone #:
Zone Protected Area Zone Type