DSC Power632

40
[352] Test Transmission Reporting Codes
(Section 5.9 “Communicator – Reporting Codes” on pg. 18, & Appendix A)
I_______I_______I 1. Periodic Test Transmission I_______I_______I 3. GSM1000 Test Transmission Code*
I_______I_______I 2. System Test
*The GSM Test Transmission Code must be programmed as “00” for the GSM Test Transmission to be disabled.
[353] Wireless Maintenance Reporting Codes
(Section 5.9 “Communicator – Reporting Codes” on pg. 18, & Appendix A)
I_______I_______I 1. Wireless Device Low Battery Alarm I_______I_______I 2. Wireless Device Low Battery Restore
[360] Communicator Format Options
(Section 5.10 “Communicator – Reporting Formats” on page 19)
NOTE:The Third telephone number follows the format of the First telephone number.
Default
02
I_______I_______I 1st/3rd Telephone Number
02
I_______I_______I 2nd Telephone Number
01 20 BPS, 1400 HZ handshake 04 SIA FSK 07 10 BPS, 1400Hz Handshake
02 20 BPS, 2300 HZ handshake 05 Pager 08 10 BPS, 2300Hz Handshake
03 DTMF CONTACT ID 06 Residential Dial
[361] Alarm/Restore Communicator Call Directions
(Section 5.6 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I_______I 1 1st Telephone Number Disabled
OFF
I_______I 2 2nd Telephone Number Disabled
OFF I_______I 3 1st Telephone Number (via GSM) Disabled
OFF
I_______I 4 2nd Telephone Number (via GSM) Disabled
OFF
I_______I 5-8 For future use
[363] Tamper/Restore Communicator Call Directions
(Section 5.6 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF I________I 2 2nd Telephone Number Disabled
OFF
I________I 3 1st Telephone Number (via GSM) Disabled
OFF
I________I 4 2nd Telephone Number (via GSM) Disabled
OFF I________I 5-8 For future use
[365] Opening/Closing Communicator Call Directions
(Section 5.6 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF
I________I 2 2nd Telephone Number Disabled
OFF
I________I 3 1st Telephone Number (via GSM) Disabled
OFF I________I 4 2nd Telephone Number (via GSM) Disabled
OFF
I________I 5-8 For future use
[367] System Maintenance Alarm/Restore Communicator Call Directions (Section 5.6 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF
I________I 2 2nd Telephone Number Disabled
OFF I________I 3 1st Telephone Number (via GSM) Disabled
OFF
I________I 4 2nd Telephone Number (via GSM) Disabled
OFF
I________I 5-8 For future use
[368] System Test Transmissions Communicator Call Directions
(Section 5.6 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF I________I 2 2nd Telephone Number Disabled
OFF
I________I 3 1st Telephone Number (via GSM) Disabled
OFF
I________I 4 2nd Telephone Number (via GSM) Disabled
OFF I________I 5-8 For future use
NOTE:The GSM1000 backup call directions will only back up their respective telephone numbers.