DSC PowerSeries PC1832

Module Programming
51
Module Programming
[801] PC5400 Printer Module Programming
Refer to the PC5400 Installation Manual for installation and programming instructions.
[802] PC59xx VOX Module Programming
Refer to the PC59xx Installation Manual for installation and programming instructions.
[804] PC5132 Wireless Expansion Programming
Refer to the PC5132 Installation Manual for programming locations and instructions.
[805] PC5100 Programming
Refer to the PC5100 Installation Manual for programming locations and instructions.
[851] T-Link Programming
Refer to the T-Link Installation Manual for programming locations and instructions.
Special Installer Functions
[899] Template Programming
[900] Panel Version Displayed
[901] InstallerWalk Test Mode Enable/Disable
[902] Module Supervision Reset
[903] Module Supervision Field
[904] Wireless Module Placement Test
[905] - [909] For Future Use
[990] Installer Lockout Enable
[991] Installer Lockout Disable
[992] For Future Use
[993] Restore Alternate Communicator to Default Programming
[994] For Future Use
[995] Restore Escort5580 to Default Programming
[996] Restore PC5132 to Default Programming
[997] Restore PC5400 to Default Programming
[998] Restore PC59xx to Default Programming
[999] Restore Control Panel to Default Programming
WWW.DIYALARMFORUM.COM