04/2022
-
Version 1
DoorTec Deutschland | www.doortec.online
19
Änderungen vorbehalten | Subject to Modifications
10.5 Safety device - Pneumatic safety edge
Parameter 21:04)
10.6 Additional safety edge
10.7 Photo Beam one way - Photo 2
(Testing required)
The supply voltage of the transmitter is switched off to
test the photocell. Without testing, the sensor can not
be used.
10. CONNECTIONS X3
10.1 Command devices / 6 wire connection
The LED light when a button is actuated or when inter-
rupting the STOP circuit.
10.2 Command devices / 4 wire connection
10.3 Safety device - Electrical safety edge
(Parameter 21:02)
10.4 Safety device - Optical safety edge
(Parameter 21:03)
Safety edge
To Next Page
Loading...
