10- MAINS CONNECTION
JACK with electronic ballast operate at 90-260 VOLT 50-60 Hz.
Prior to connecting the unit to your mains supply, ensure that the model in your
possession correctly matches the mains supply available.
For connection purposes, ensure that your plug is capable of supporting 1,5 amps
at 230 VOLT, or 3 amps at 90 VOLT.
Strict adherence to regulatory norms is strongly recommended.
MAINS AC OUTPUT 90-260V 50/60 Hz (16A Max)
(Cod. 03.MS012.EBLFP)
(Cod. 03.MS012.EB.L)
MAINS AC INPUT 90-260V 50/60 Hz
10.1- Protection
The use of a thermal magnetic circuit breaker is recommended for each JACK.
A good earth connection is essential for the correct operation of the projector.
To Next Page
Loading...
Need help?
General
