INDEX:
1- SYMBOLS 4
2- GENERAL WARNING 4
3- GENERAL WARRANTY CONDITION 4
4- TECHNICAL FEATURES 5
5- ACCESSORIES 7
6- IMPORTANT SAFETY INFORMATION 8
6.1 Fire prevention
6.2 Prevention of electric shock
6.3 Protection against ultraviolet radiation
6.4 Safety
6.5 Level of protection against the penetration of solid and liquid objects
7- MOUNTING / REPLACING THE LAMP AND LAMP ALIGNMENT 10
8- VOLTAGE AND FREQUENCY 11
9- INSTALLATION 11
9.1 Safety cable
9.2 Protection against liquids
9.3 Movement
9.4 Risk of fire
9.5 Forced ventilation
9.6 Ambient temperature
10- MAINS CONNECTION 13
10.1 Protection
11- DMX SIGNAL CONNECTION 14
11.1 DMX Addresses
11.2 Selecting the DMX address
12- FIRMWARE UPDATING 15
13- DISPLAY FUNCTIONS 16
14- ERROR MESSAGES 20
15- HIDDEN MENU 21
15.1 Calibration mode
16- PAN SPEED & TILT SPEED 22
17- BASE FANS SPEED AND BASE LAMP SPEED 22
18- OPENING THE PROJECTOR HOUSING 23
19- REPLACING GOBOS 23
20- PERIODIC CLEANING 24
20.1 Lenses and reflectors
20.2 Fans and air passages
21- PERIODIC CONTROLS 25
22- DMX PROTOCOL 26
23- 9 MOTORS CONTROL CARD 38
24- PAN & TILT CARD 39
25- DISPLAY CARD 40
26- LAMP ON-OFF CONTROL CARD 40
27- ROTATING GOBO WHEEL 41
28- ROTATING GOBO PROVIDED INTO THE UNIT BOX 41
29- FIXED GOBO WHEEL 42
30- COLOUR WHEEL 43
To Next Page
Loading...
Need help?
General
