13- DISPLAY FUNCTIONS
Display Display Flip
ON THE GROUND
DISPLAY FLIP / STAND BY / CONTRAST (Default)
SUSPENDED
Display Flip:
Reverses display's reading depending on
the mounting position
(On the ground or suspended).
Display Standby
Display Standby: OFF = Display
To turn off the display (after 5 seconds) Standby disabled
or leave it always on. (Default)
ON = Display goes OFF
Display Contrast: after 5 seconds
Display contrast regulation (1-32)
Display Contrast
1-32 (Default = 25)
DMX Mode DMX Mode
17 channels
DMX MODE 25 channels (Default)
To select DMX mode :
17 channels or 25 channels (default)
Lamp BY DMX = Lamp ON / OFF
via DMX (Default)
LAMP ALWAYS ON = Forced ON
Lamp always ON, always OFF, ALWAYS OFF = Forced
lamp ON-OFF selectable via DMX OFF
and lamp life time reset RESET COUNTER = Lamp
life time reset
ADJUST
To adjust the lamp with no mixer
connected. LAMP ADJUST = To adjust
It’s possible to set the parameters the lamp with no mixer
for PAN-TILT, ZOOM and FOCUS connected.
It’s possible to set the
Parameters for PAN-TILT,
ZOOM and FOCUS
Reset ENABLED = Reset
via DMX enabled (Default)
RESET DISABLED = Reset
Reset via DMX ENABLED / DISABLED via DMX disabled
And unit reset NOW = Unit motors reset