4- TECHNICAL FEATURES
Interface / Control / Programming
* LCD graphic display (control / management / monitoring of the main parameters)
* 4 soft-keys (control / management / monitoring of the main parameters)
* Controlled via DMX 512 standard digital communication protocol
* RDM
* ARTNET (available on request)
* Wireless ready
* Internal operating system updatable via D.T.S. RED BOX interface and
hyperterminal program on windows based PC
DMX
25 DMX channels (default) or 17 DMX channels
Pan & Tilt
Jack FPR (Cod. 03.MS012.EBLFP)
* 'FPR': limitless pan rotation, in either direction, never having to reverse motion
Tilt 270° (1,5 sec.)
Jack (Cod. 03.MS012.EB.L)
* Pan 540° (2,5 sec.); Tilt 270° (1,5 sec.)
* New Tri-phase stepper motor technology for ultra-fast and silent Pan &Tilt
movements
* 16-bit movement resolution
* Selectable speed ranges
Power supply
* Electronic ballast; 90-260 V 50/60 Hz
* Power consumption: 230 W with PFC
Energy saving
* Power saving mode (the lamp dims to 80% after shutter closure)
Connectors
* DMX: 4 XLR connectors (3-pole In and Out; 5-pole In and Out) by Neutrik;
* Power supply: POWERCONN connectors (Power In / Power Out) by Neutrik
Operating ambient temperature
-10° / 40°
Weight
11,9 Kg
Internal safety devices
* Overvoltage circuit protection and overtemperature circuit protection
International certifications
Safety: EN 60598-1: 1993
EN 60598-2-17: 1989
A1-A3: 1993
EMC: EN 55015
To Next Page
Loading...
Need help?
General
