19
Front 3.5mm Aux Input
Connect an optional audio source into the 3.5mm (front panel) input. Select auxiliary input from the Main Menu to
listen to audio. Adjust volume on the external audio source as needed (if connected to the headphone output of the
device).
Voice Activation
Your receiver is designed with an easy access voice activation button to use Siri® or the Google Assistant™ via
your car's Bluetooth. Interact with your smartphone assistant while you drive with only the push of a button!
Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button
, and
the receiver will switch into Bluetooth mode, This will activate Siri® or Google AssistantTM on your smartphone.
You will need to manually switch back to the previous or desired mode once this operation is terminated.
DV622 OPERATION
Rear Camera Operation - (Optional)
Connect an optional rear camera to the Camera Input (Black RCA connector with
violet cap). Refer to the wiring diagram for details.
Manual selection - Touch CAMERA icon from the Main Menu or from any
operational mode (when enabled) to select camera mode. Touch the top left area
on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras that are ALWAYS on while
driving, it is not meant for cameras that are connected to the vehicle's reverse
light.
The unit will automatically select camera mode when connected to the reverse
lamp circuitry.
Using Rear Camera
Auto Selection
To Next Page
Loading...
Need help?
General
