What to do if my Dual Receiver unit will not turn on?
If your Dual Receiver unit isn't powering on, there could be a few reasons. First, check if the yellow and red wires are properly connected and have the correct voltage (11~16VDC). Next, ensure the black wire is securely connected to the ground. Finally, inspect the fuse and replace it if it's blown.
What to do if my Dual XDM17BT unit has power but no sound?
If your Dual Receiver has power but isn't producing any sound, the issue might be with the speaker wires. First, check the connections at the speakers to make sure they are secure. Also, check if any of the speaker wires are touching each other or the chassis ground. If they are, insulate all bare speaker wires from each other and the chassis ground.
Why does my Dual XDM17BT unit blow fuses?
Your Dual Receiver might be blowing fuses due to several reasons: * The yellow or red wire may be touching the chassis ground; check for any pinched wires. * Speaker wires could also be touching the chassis ground; again, check for pinched wires. * Finally, the fuse might have an incorrect rating; ensure you are using a fuse with the correct rating.
Why does 'NO FILE' appear on my Dual XDM17BT Receiver display?
The 'NO FILE' message appears on your Dual Receiver display because there are no playable MP3 files found on the connected device. Check the device to ensure it contains valid MP3 files.
Why does 'NO SUPPORT' appear on my Dual XDM17BT display?
General| Bluetooth | Yes |
|---|---|
| Preamp Outputs | Yes |
| USB Port | Yes |
| Auxiliary Input | Yes |
| AM/FM Tuner | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| Radio Tuner | AM/FM |
| Display | LCD |
| Power Output | 200 Watts |
| Peak Output | 50W x 4 |
| DIN | Single DIN |
Read the manual before installation and follow pre-installation steps.
Guidance on mounting the head unit, including DIN mounting and securing the sleeve.
Illustrates the correct connections for power, speakers, and accessories.
Identifies and explains the function of all buttons and ports on the unit.
Details basic operations like power, volume, mute, and clock setting.
Instructions for seeking, manual tuning, band selection, and preset management.
Guide to playing MP3 files from USB, including track selection and playback controls.
Steps for pairing devices and streaming audio wirelessly via Bluetooth.
Information on using the Dual iPlug app and voice activation features.
How to connect external audio sources using the front 3.5mm Aux input.
Technical details including tuner ranges, speaker impedance, and dimensions.
Common problems, their causes, and recommended solutions for the unit.
Details warranty terms, coverage, exclusions, and service contact information.
Statement on compliance with FCC rules and guidelines for operation.
To Next Page
